Give your fountain pen a chance to write as well as it possibly
can. We recommend placing several sheets of paper, or a pad,
under the sheet you're writing on. Some people use a stack
of newspaper to write on to get the best feel.
When filling a fountain pen from a bottle of ink (bladder,
piston- or plunger-filler system) be sure to immerse the entire
nib and feed, right up to, and even slightly over, the edge
of the section (the part of the pen you grip) before working
the lever, plunger or piston. Failing to immerse the nib will
result in drawing air into the reservoir along with the ink.
Only a Sheaffer's Snorkel system is designed to have the extendable
tube inserted into the ink well. But, be careful! Be sure
there is sufficient depth of ink in the bottle. You don't
want to impact the nib's tipping on the bottom of the bottle
when filling.
After filling a fountain pen from a bottle, blot the nib,
feed and section with a soft tissue. This will prevent excessive
ink flow and dripping.
There is always a small amount of air in the bladder, converter,
cartridge or reservoir. This air will expand or contract with
air pressure changes, the heat from your hand, direct sunlight
or being left under a lighted desk lamp. All these changes
can cause leaks onto the surface of a nib and ink to accumulate
in the cap. This can eventually be transferred to the section
edge when capped and end up on your fingers. We recommend
using a twisted paper towel or Q-tip to clean the inside of
the cap as a part of regular maintenance.
Fountain pens, especially vintage fountain pens, are idiosyncratic
creatures. If you are neither able, nor willing, to put up
with slight inconveniences such as minor leaks, or having
to clean and maintain the instrument in order to keep it functioning
well, you should probably stick with a rollerball or ballpoint
pen. John only half facetiously says fountain pens are the
reason Kleenex was invented.
